A few years ago I replaced the original pedestal mount table in our 2017 Pleasure-Way Lexor TS with a Lagun mount and a top that was made by hinging the original bed boards together.  The table was an improvement and worked well but it had a few issues.  

The design used two heavy panels and required the Lagun table support to be attached to just one of the panels.   The other panel had to be supported by the use of some sliding metal brackets.  The brackets were noisy and had several sharp edges.  I managed to solve the noise issue with some well placed furniture slides and felt.  Even though I sanded the sharp edges on the brackets  I was still worried that one of the brackets would scratch something as I was storing or setting up the table.  The uneven weight distribution also put some unnecessary stress on the Lagun support.  I realized that there was a better way and finally found the time to implement the idea.  

I built an initial prototype out of 1/2″ whiteboard.  We both gave it a thumbs up after a few months of use and decided to move forward with a final version. The two hinge per leaf setup on the prototype worked well but I decided to opt for three hinges per leaf on the final version to provide a bit more support.   

I had the final design built by the Weekender Sprinter Shop on Etsy.   Their craftsmanship and service were terrific. The leaves are well supported by the three hinges and the tight tolerance of the build. No additional support brackets are required.   

The overall dimensions are 28″ x 24.75″.  Each leaf is 7″ x 24.75 and the center panel is 14″ x 24.75″.  The wood is 1/2″ Bamboo ply.  I used 3M VHB to mount it to the Lagun tabletop base instead of using screws.  

The dimensions of the table give us ample space and the trifold design has made moving around quite a bit easier.  A simple flip of a leaf allows one of us to get up and move around while the other stays seated.  The table is lighter than the original  which makes it easier to store and set up.  The tabletop’s dimensions also allow it to support the ottoman cushions when using the full queen-sized bed configuration.  

The new setup in combination with the table that we previously added to our front lounge have added some nice flexibility to our little home on wheels.